Milwaukee 4933411550: professional and multi-equipped


If you are interested in the Milwaukee 4933411550, in this review you will find all the most important technical features of a genuinely top of the range mitre saw.

The Milwaukee 4933411550 is not a simple wood cut-off machine, but a real jewel of carpentry, as basically demonstrated by its price. We are in fact faced with a high-end model, with a cost over 1,000 euros, but with a series of features of the highest level. Let’s refer, for example, to the double LED light to highlight the cutting area, and the integrated suction system, with a waste removal capacity of around 75% of the total. In addition, let’s not forget to emphasize the great quality of the blade with 60 teeth, and its precision in the cuts.

Our advice is to give it a chance and to deepen its technical sheet, because the surprises do not end here!

  • Head reduction: double reduction of the machine head at 0°-48° with pre-set stops at 0°, 22,5°, 33,85°, 45°, 48°.
  • Cable: 3 mt
  • Motor Design:unique In-Line developed
  • RPM:3200 rpm
  • Lighting:double lighting of the cutting surface for precise cuts


Technical features

  • Power of 1.800 W
  • Disc diameter of 305 mm
  • Weight of the mitre saw of 29.5 kg
  • Model: radial cut-off machine
  • Cutting for wood


Construction and materials

The Milwaukee 4933411550 is a very solid and well-built mitre saw with an excellent quality finish. Composed largely of steel, it is very robust and you can tell by the weight, which in fact is close to 30 kilograms.

One of the main peculiarities of this model is the presence of an integrated suction system: although it is not a real novelty, it puts in the field of performance higher than average, so as to be able to eliminate 75% of the dust produced by cutting wood. Among other things, suction takes place on both sides of the disc, and this is not a feature we often find (quite the opposite).

How to ignore, then, the presence of the double LED light? This extra is very important, especially for those who want to make complex cuts in low visibility conditions.

Considering that this is a model with double inclination of the cutting head (but we’ll go into this in more detail later), the light helps to center with great precision the area to be sawn, without uncertainties. Also, it’s worth noting the design of the Milwaukee 4933411550, which allows you to enjoy absolute visibility during every cutting operation, even if you maneuver it from an angled position.

Finally, it has a rather long power cord (3 meters) and a rich set of accessories, which includes the following elements: the clamp to lock the pieces to be cut, the bag to collect the sucked shavings, the adapter for the tube of a 35/58 millimeter vacuum cleaner and the steel blade with 60 teeth.


Blade and cutting capacity

The 60-tooth blade is designed for cutting materials such as wood and plastic, as well as plywood. If you’re going to use it to saw metals, the machine might run into trouble, as it’s a model designed for carpentry and joinery. Also, it must be said that it is not afraid of cutting solid wood, in addition to the classic medium density MDF wood.

The merit goes to the direct drive motor, which we will deepen later, and that allows a decisive action and bursting even on the hardest wood, without producing burrs. And the cutting capacity? Here’s a list of the main values.

  • Cutting at 90 degrees (90 degree tilt): 342 x 102 mm
  • 90 degree cutting (45 degree tilt): 342 x 57 mm
  • 45-degree cut (90-degree tilt): 241 x 102 mm
  • 45 degree cut ( 45 degree tilt): 241 x 57 mm
  • Head lowering:double lowering of the machine head at 0°-48° with pre-set stops at 0°, 22,5°, 33,85°, 45°, 48°.
  • Cable: 3 mt
  • Motor Design:unique In-Line developed
  • RPM:3200 rpm
  • Lighting:double lighting of the cutting surface for precise cuts


Blade tilting and bevel

Above we mentioned that the Milwaukee 4933411550 is a radial wood cutting saw with double head tilting. This means you’ll be able to tilt the blade either to the right (60 degrees) or left (55 degrees), while the stops on the scale correspond to 0, 15, 22.5, 31.6, 45, and 60 degrees.

Secondly, you can also adjust the angle for bevel cutting, this time up to a maximum of 48 degrees on both sides. We’re talking about a pretty high value, considering that on average you don’t go over 45 degrees per side. There are of course notches to precisely set the degrees, and they correspond to 0, 22.5, 33.85, 45 and 48 degrees.


Motor and performance

If you’re going to be working with wood, and doing it with the utmost precision, then you’re going to fall in love with the Milwaukee 4933411550 radial mitre saw.

This unit, in fact, mounts a 1,800-watt direct drive motor that “unloads” the maximum power on the blade, preventing energy dispersion and optimizing the cutting phase. Combining this feature with the wide range of movement options gives you a tool that can work in any conditions. Even when it comes to complex cuts, thanks to the alignment of the blade with pinion, which runs up to a speed of 3,200 rpm.

In summary, these are data that confirm what is guessed from the price: this model of the Milwaukee isprofessional, therefore suitable for a public that seeks the maximum for woodworking.


Opinions and conclusions

There are other commendable features to highlight, such as the quick tilt system, which allows you to use this machine with all the simplicity in the world. Also, the Milwaukee 4933411550 has a single lever locking system that makes things even easier, and a fixed side clamp that accomplishes its task great.

  • Head lowering: double lowering of the machine head at 0°-48° with pre-set stops at 0°, 22,5°, 33,85°, 45°, 48°.
  • Cable: 3 mt
  • Motor Design:unique In-Line developed
  • RPM:3200 rpm
  • Lighting:double illumination of the cutting surface for precise cuts


We will be happy to hear your thoughts

Leave a reply

Turning Machine
Logo
Enable registration in settings - general